Recently, the Australian National Disability Insurance Scheme (NDIS) have made a change to the information you are required to submit when lodging an AT application, which includes showing the relevant AUS/ISO standards that the equipment meets.
We have put together the following information to make the application process a little easier.
Medifab Product Compliance with Australian Standards
The Medifab products listed below have been tested to and comply with the applicable requirements in the following Australian and ISO products standards.
| Product Name | Australian Standard | ISO/Other Standard | ARTG Certificate |
|---|---|---|---|
| Hoggi Duro Buggy | AS 3695 | n/a | 160785 |
| Hoggi Bingo Evolution Stroller (includes Bingo Mini) | AS 3695 | n/a | 160785 |
| Pixi Push Chair/Stroller | AS 3695 | n/a | 151368 |
| BINGO Spex Seating System | AS 3695 (Stroller) | AS ISO 16840.4 (Seat) | 160785 |
| Carrot Car Seat | n/a | ECE R44/04 | 151343 |
| Hero Car Seat | n/a | ECE R44/04 ECE R129 |
223836 |
| Starlight Car Seat | n/a | ECE R44/04 | 223836 |
| Ipai LGT Car Seat | n/a | ECE R44/04 | 223836 |
| Gravity Chair | n/a | n/a | 164797 |
| Kayserbetten Beds | n/a | DIN EN 32623:2002 DIN EN 1970:2000 DIN EN 60601-2-38:2001 DIN EN 60601-1:1996 |
151342 |
| Houdini Vehicle Harnesses | n/a | n/a | 199851 |
| Kool Stride Stroller | AS 2088:2013 | n/a | 339399 |
| Jenx Dreama | n/a | EN 12182:2012 EN 60601-1-2:2007 |
261614 |
| Jenx Nursery Table | n/a | EN 12182:2012 EN 60601-1-2:2007 |
261613 |
| Jenx Corner Seat | n/a | EN 12182:2012 EN 60601-1-2:2007 |
261613 |
| Jenx Atom | n/a | EN 12182:2012 EN 60601-1-2:2007 |
261613 |
| Jenx Junior+ | n/a | EN 12182:2012 EN 60601-1-2:2007 |
261613 |
| Jenx Multiseat | n/a | EN 12182:2012 EN 60601-1-2:2007 |
261613 |
| Jenx Penguin | n/a | EN 12182:2012 EN 60601-1-2:2007 |
261592 |
| Jenx Kangaroo | n/a | EN 12182:2012 EN 60601-1-2:2007 |
261592 |
| Jenx Monkey | n/a | EN 12182:2012 EN 60601-1-2:2007 |
261592 |
| Jenx Standz | n/a | EN 12182:2012 EN 60601-1-2:2007 |
261592 |
| Jenx Multistander | n/a | EN 12182:2012 EN 60601-1-2:2007 |
261592 |
| Jenx Prone Stander | n/a | EN 12182:2012 EN 60601-1-2:2007 |
261592 |
| Jenx Supine Stander | n/a | EN 12182:2012 EN 60601-1-2:2007 |
261592 |
| Simple Stuff Works | n/a | n/a | 339398 |
| Poz 'in' Form | n/a | ISO 10993/ISO 12952 | 164671 |
| CareWave | n/a | ISO 10993/ISO 12952 | 164671 |
June 2022
Spex Product Compliance with Australian Standards
| Product Name | AS/NZS 3695 & AS/NZS 3696 (Wheelchair requirements and test methods) | AS/ NZS ISO 16840.4 (Seating Systems for use in Motor Vehicles) | ARTG Certificate |
|---|---|---|---|
| Seat Base | ✓ | ✓ | 229499 |
| Spex Cushions | ✓ | ✓ | 229625 |
| Spex Back Supports | ✓ | ✓ | 160970 |
| Spex Medial Thigh/Knee Supports | ✓ | ✓ | 229499 |
| Spex Lateral Trunk Supports | ✓ | ✓ | 229499 |
| Spex Head Supports | ✓ | ✓ | 160972 |
| Spex Arm Supports | ✓ | ✓ | 160973 |
| Spex Lateral Pelvic/Thigh Supports | ✓ | ✓ | 229499 |
| Spex Support Harness and Belts | ✓ | n/a | 229499 |
Spex also maintains a Quality Management System that is certified as meeting the requirements of ISO 13485:2016
January 2021
Warranty Information
Spex warranty information can be located at:
https://www.spexseating.com/warranty-information
Spex warranty claims can be made at:
https://www.spexseating.com/warranty
Medifab warranty claims can be made at:
https://www.medifab.com.au/warranty
